Bovie Aaron 1250 Скачать руководство пользователя страница 2 | Manualshive

Страница: 2 / 68

Bovie Aaron 1250 Скачать руководство пользователя страница 2

PREFACE

This Service Guide and the equipment it describes are for qualified technicians who maintain and repair the Aaron
1250 Electrosurgical Generator. Additional User information is available in the

Aaron 1250 Electrosurgical Generator

User’s Guide

.

This document covers technical descriptions of the Aaron 1250 including its physical appearance, all operator con-
trols and indications, operational specifications, component functional descriptions (module level), diagrams of the
electronic circuits used, and troubleshooting guidelines (with chart comparisons).

The Aaron 1250 was constructed with the highest quality components, and was built in a registered
environment. In the unlikely event that your generator fails within 1 year of purchase date, Bovie / Aaron Medical
will warranty the product and effect factory repairs. Please refer to Appendix A Warranty for what is covered, how
long, and “How to Receive a Return Authorization Number”.

Equipment covered in this manual

Aaron 1250 Electrosurgical Generator (110 VAC Model) A1250

Aaron 1250 Electrosurgical Generator (220 VAC Model) A1250-220

For Information Call

Bovie Aaron Medical • St. Petersburg, FL 33710
U.S. Phone 1-800-537-2790 Fax 1-800-323-1640 • International Phone +1-727-384-2323 Fax +1-727-347-9144
www.aaronmed.com • [email protected]

EU Authorized Representative:
Peter J. Smith Medical Products Marketing

18 Yeates Close
Thame OX9 3AR
United Kingdom

Made in USA

Printed in USA

©2006 Bovie Aaron Medical, A Bovie Company.
All rights reserved.
Contents of this publication may not be reproduced without the written permission of Bovie Aaron Medical.

Bovie Aaron part number, MC-55-039-001 Rev. 3

2

Bovie / Aaron Medical

«
1
2
3
4
...
»

Содержание Aaron 1250





































































Отзывы:

Нет отзывов