Bovie Aaron 1250, Руководство по обслуживанию, Страница: 18 / 68

Visual LED Indictors A Return Electrode Indicator displays which type of
patient Return Electrode is attached to the patient. It also
has an associated audio alarm that sounds when a patient
return electrode is not detected during activation.
Audible Indicators An activation tone sounds whenever the Aaron 1250
Electrosurgical Generator is activated. The volume may be
adjusted up or down on the rear of the unit.
An Alarm Siren sounds during all alarm conditions. The
volume of this alarm cannot be adjusted.
CUT AND BLEND CONTROLS
Figure 2-2 Controls for the Cut and Blend modes
18 Bovie / Aaron Medical
Cut
Blend
Cut
Cut Indicator
Illuminates when
Pure Cut Mode
is selected.
Cut and Blend
Activation Indicator
Illuminates when you
activate either Pure Cut
or Blend Mode.
Cut and Blend Power Control Dial
Increases or decreases the Cut or Blend
power output in increments of 1 watt.
Cut and Blend
Power Display (watts)
Indicates the power set for the
Pure Cut or Blend Mode.
Blend Indicator
Illuminates when
Blend Mode
is selected.
Cut Selector
When pressed, selects
the Pure Cut Mode.
Blend Selector
When pressed, selects
the Blend Mode.