Bosch VIDEOJET connect 7000, Руководство по эксплуатации

Страница: 45 / 60

Force registration now
Force the registration by transferring the IP address to the DynDNS server. Entries that change
frequently are not provided in the Domain Name System. It is a good idea to force the
registration when setting up the device for the first time. Only use this function when
necessary and no more than once a day, to avoid the possibility of being blocked by the
service provider. To transfer the IP address of the device, click the Register button.
Status
The status of the DynDNS function is displayed here for information purposes; these settings
cannot be changed.
Advanced
Cloud-based Services
The Scene Mode determines how the camera communicates with Bosch Cloud-based Security
and Services. For more information about these services and their availability, visit:
http://cloud.boschsecurity.com
–
Select Auto to allow the camera to poll the server a few times; if no contact is made, it
stops polling.
– Select On to constantly poll the server.
– Select Off to block polling.
RTSP port
If necessary, select a different port for the exchange of the RTSP data from the list. The
standard RTSP port is 554. Select Off to deactivate the RTSP function.
Authentication (802.1x)
To configure Radius server authentication, connect the unit directly to a computer using a
network cable. If a Radius server controls access rights over the network, select On to activate
authentication to communicate with the unit.
1.
Enter the user name that the Radius server uses for the unit in the Identity field.
2. Enter the Password that the Radius server expects from the unit.
Network Management
SNMP
The camera supports the SNMP V1 (Simple Network Management Protocol) for managing and
monitoring network components, and can send SNMP messages (traps) to IP addresses. It
supports SNMP MIB II in the unified code.
If On is selected for the SNMP parameter and a SNMP host address is not entered, the device
does not send the traps automatically and will only reply to SNMP requests. If one or two
SNMP host addresses are entered, SNMP traps are sent automatically. Select Off to
deactivate the SNMP function.
SNMP host addresses
To send SNMP traps automatically, enter the IP address of one or two target devices here.
SNMP traps
To choose which traps are sent:
1.
Click Select. A dialog box appears.
2. Click the check boxes of the appropriate traps.
3. Click Set to close the window and send all of the checked traps.
12.2.6
12.2.7
12.3
12.3.1
12.3.2
12.3.3
12.4
12.4.1
VIDEOJET connect 7000 Network | en 45
Bosch Security Systems Operation Manual 2014.10 | 1.4 | F.01U.291.524