Bosch VIDEOJET connect 7000, Руководство по эксплуатации

Страница: 34 / 60

Transcoder
Transcoder Setup
Define up to four cameras for which you want to offer transcoded video. Transcoding is only
available for recorded video. Therefore, make sure that these cameras will have recordings,
either by configuring the cameras accordingly or by having the transcoder managing it. For
information, the HTTP and HTTPS port of the transcoder are displayed.
Device [number]
Notice!
If a MIC7000 camera is assigned to Camera 1, it becomes “bound” to the alarm I/O functions
and the washer functions provided by the VIDEOJET connect 7000 device.
4
Click a drop-down box. The system scans for available cameras which are listed for
selection. This includes analog cameras which are integrated into your system through a
single-channel encoder. In this case, the corresponding encoder is listed for selection.
4
Select the desired camera from the list. The parameters Type, MAC, and Name are
displayed, if available.
Name
4
Change the name if desired.
Do not use any special characters, for example &, in the name. Special characters are not
supported by the system's internal management.
Note that the name here is only used for the transcoder operation. Changes here will not
overwrite the name assigned to the camera or to the encoder on the corresponding SETTINGS
page of the respective unit. The name that you enter here will be displayed in the title bar of
the transcoder Web pages and in the list of available cameras on the PLAYBACK page. If you
leave the field empty, the IP address of the unit is displayed.
Password
4
In the field Password, enter the service password of the selected camera.
Http port, Https port
By default, the numbers HTTP port and HTTPS port for the camera are set automatically for
each camera as an offset to the transcoder ports. The corresponding fields are marked by the
white outline and the highlighted connection line. You may change the numbers, if necessary,
on the page Network Access.
4
Repeat the procedure for each camera that you want to add.
4
Click Set to save the settings. For each connected camera a link is added in the title bar
next to the SETTINGS link stating the camera number 1 to 4 and its name or IP address.
Configure Router
4
If your router has UPnP enabled, click Configure Router to save the settings to the
router. Otherwise, configure your router manually.
The cameras are now available for selection on the PLAYBACK page. Transcoding will only be
possible once recordings for the cameras are available.
9
9.1
9.1.1
9.1.2
9.1.3
9.1.4
9.1.5
34 en | Transcoder VIDEOJET connect 7000
2014.10 | 1.4 | F.01U.291.524 Operation Manual Bosch Security Systems