Bosch VGA-PEND-ARM, Руководство по установке

Страница: 3 / 36

3 AutoDome Pendant Arm Mount Table of Contents | en
Table of Contents
1 Important Safety Instructions 5
1.1 Safety precautions 5
1.2 Important safety instructions 5
1.3 Important Notices 7
1.4 UL certification 7
1.5 Bosch notices 8
2 Installing the Pendant Arm Wall, Corner, and Mast (Pole) Mounts 9
2.1 Unpacking 9
2.1.1 Parts List 9
2.1.2 Optional Mounting Accessories 9
2.1.3 Optional Power Supplies 9
2.1.4 Description 10
2.1.5 Tools Required 10
2.2 Pre-installation Checklist 10
2.3 Pressurized Environmental Mounting Options 11
2.4 Route Wires 11
2.4.1 Coaxial Cable Connections 12
2.5 Installing the VGA-PEND-ARM 12
2.5.1 Attach the Pendant Arm to the Mounting Plate 13
2.5.2 Route and Connect Wires to a Power Supply Box 14
2.6 Attach Pendant to Arm and Tighten 17
3 Cable and Wire Standards 19
3.1 Power 19
3.2 Wire Distance Guide for Pendant 19
3.3 Video and Control Cables 19
3.3.1 Using Coaxial Cable to Transmit Video and Control 19
3.3.2 Using UTP to Transmit Video and Control 20
3.3.3 Using Ethernet to Transmit Video and Control 21
3.3.4 Using Multi-mode Fiber Optic to Transmit Video and Control 21
3.3.5 Using a Fiber Optic Ethernet Media Converter to Transmit Video and Control 22
3.4 Control-only Cables 22
3.4.1 Controlling the AutoDome via Biphase 22
3.4.2 Controlling the AutoDome via the RS232 Protocol 24
3.4.3 Controlling the AutoDome via the RS485 Protocol 25
3.5 Fiber Optic Module with an RS232/RS422 Controller 26
3.5.1 Connecting to an LTC 4629 Head End Data/Video Transceiver 27
3.5.2 Configuring the VG5 AutoDome 27
3.6 Audio Cables 28
4 Alarms and Relay Connections 30
4.1 Alarm Inputs 30
4.2 Configuring Supervised Alarms (inputs 1 and 2) 30
4.2.1 Configuring a Normally Open Supervised Alarm 30
4.2.2 Configuring a Normally Closed Supervised Alarm 31
Bosch Security Systems, Inc. Installation Guide F.01U.250.238 | 1.0 | 2011.08
Available from A1 Security Cameras
www.a1securitycameras.com email: sales@a1securitycameras.com