Bosch VGA-PEND-ARM, Руководство по установке

Страница: 21 / 36

3.3.3
3.3.4
AutoDome Pendant Arm Mount Cable and Wire Standards | en 21
Using Ethernet to Transmit Video and Control
CAUTION!
Ethernet connections must be made to non-exposed (indoor) networks only.
The AutoDome VG5 700 series connects to a 10 Base-T/100 Base-TX network either directly or
via a switch. Both video and control are transmitted over a standard TCP/IP network using the
built-in Web server.
Cable Type CAT-5E or CAT 6 Ethernet
Maximum Distance 100 m (328 ft)
Bandwidth 10 Base-T/100 Base-TX
Terminal Connector RJ45, Female
WARNING!
Do not connect a coaxial cable while the RJ45 Ethernet cable is connected.
Using Multi-mode Fiber Optic to Transmit Video and Control
Fiber Optic kits, available for AutoDome 100 and 600 Series cameras, transmit both video and
Biphase control over an analog singlemode or multimode fiber.
Multimode
Fiber Type 50/125 µm, 62.5/125 µm, low loss multimode glass fiber
Maximum Distance 4 km (2.5 miles)
Minimum Bandwidth 20 MHz (Video - 850 nm / Control - 1300 nm)
Requirement Bosch LTC 4629 Fiber Receiver at controller end of system
Terminal Connector ST
Singlemode
Fiber Type 9/125 µm, low loss single glass fiber
Maximum Distance 69 km (43 miles)
Minimum Bandwidth 20 MHz (Video - 1310 nm /Control - 1550 nm)
Requirement Single mode fiber receiver at controller end of system
Terminal Connector ST
Bosch Security Systems, Inc. Installation Guide F.01U.250.238 | 1.0 | 2011.08
Available from A1 Security Cameras
www.a1securitycameras.com email: sales@a1securitycameras.com