Bosch VCD Series, Руководство по установке

Страница: 39 / 162

HD Conference Dome Installing a Recessed Mount | en 39
Bosch Security Systems, Inc. Installation Manual F.01U.265.806 | 1.0 | 2012.03
6.1.3 Installing the Camera to the Mounting Plate
To install the base to a surface or suspended ceiling using the
supplied mounting plate, do the following:
1. Loosen the single safety locking screw on the base of the
unit using the user-supplied T-10 Torx wrench.
Figure 6.4 Unlock Safety Locking Screw
2. Remove the screw from the Earth ground ( )on the top
of the mounting bracket.
3. Attach a user-supplied ground wire to the Earth ground
( ) screw hole on the mounting bracket and secure with
the screw.
4. Attach the green grounding wire from the unit to the
grounded ( ) screw hole on the mounting bracket using
the attached captive screw washer.
5. Route wires on the side of mounting plate with the
crescent shaped cut-out.
6. Connect the mating connectors (supplied in the accessory
kit) with the flying leads to the user supplied wiring (see
the Section 8 Preparing the Wiring, page 51 for wiring
information).
CAUTION!
All wires for installation applications must be routed through a
grounded conduit.