Bosch VCD Series, Руководство по установке

Страница: 134 / 162

134 en | Configuring the HD Conference Dome HD Conference Dome
F.01U.265.806 | 1.0 | 2012.03 Installation Manual Bosch Security Systems, Inc.
12.42 Alarm Task Editor
As an alternative to the alarm settings on the various alarm
pages, you can enter your desired alarm functions in script form
here. This will overwrite all settings and entries on the other
alarm pages.
1. Click the Examples link under the Alarm Task Editor field
to see some script examples. A new window will open.
2. Enter new scripts in the Alarm Task Editor field or change
existing scripts in line with your requirements.
3. When you are finished, click the Set button to transmit the
scripts to the unit. If the transfer was successful, the
message Script successfully parsed is displayed over the
text field. If it was not successful, an error message will be
displayed with further information.
12.43 Alarm Rules
The HD Conference Dome features an alarm rule engine. In its
simplest form, an alarm rule can define which input(s) activate
which output(s). Basically, an alarm rule allows you to
customize an HD Conference Dome to automatically respond to
different alarm inputs.
To configure an alarm rule specify one input from either a
physical connection, a motion detection trigger, or from a
connection to the camera’s Livepage. The physical input
connection can be activated by dry contact devices such as
pressure pads, door contacts and similar devices
Next, specify up to two (2) rule outputs, or the camera’s
response to the input. Outputs include a physical alarm relay,
an AUX command, or a preposition scene.
CAUTION!
Editing scripts on this page overwrites all settings and entries
on the other alarm pages. This procedure cannot be reversed.
In order to edit this page, you must have programming
knowledge and be familiar with the information in the Alarm
Task Script Language document.