Bosch VCD Series, Руководство по установке

Страница: 35 / 162

HD Conference Dome Installing a Recessed Mount | en 35
Bosch Security Systems, Inc. Installation Manual F.01U.265.806 | 1.0 | 2012.03
6 Installing a Recessed Mount
6.1 Description
This chapter details how to recess mount the HD Conference
Dome.
The HD Conference Dome is also suitable for surface
( Section 4 Installing a Surface Mount, page 22 ), wall
( Section 5 Installing a Wall Mount, page 28 ), and pipe mounting
( Section 7 Installing a Pipe Mount, page 44 ). For specific
directions on mounting the unit, see the manual that came with
your mount.
6.1.1 Additional Requirements
– Appropriate straight slot screwdrivers
– No. 2 Phillips screwdriver
– Appropriate tool for cutting a hole in drywall or ceiling tile
(if applicable)
– 4 in. x 4 in. junction box (optional)
– T-10 Torx wrench
– VJR-A3-SP, support kit for VJR-A3-IC mounting kit
NOTICE!
The image sensors in modern cameras are highly sensitive and
require special care for proper performance and extended
lifetime. Follow the guidelines for optimum results with your
camera:
– Do not expose to direct sunlight or bright spotlights in
operating and nonoperating conditions.
– Avoid bright lights in the field of view of the camera. Bright
lights cause a “smearing” effect, which is visible as white
lines above and below the highlight. Prolonged exposure to
bright lights may cause bleaching of the sensor's color
filters. This will be visible as colored spots in the picture
and is irreversible.