Bosch VCD Series, Руководство по установке

Страница: 124 / 162

124 en | Configuring the HD Conference Dome HD Conference Dome
F.01U.265.806 | 1.0 | 2012.03 Installation Manual Bosch Security Systems, Inc.
there is no signal. The connected monitor only displays images
when an alarm is triggered. If you select a particular video
output and a split image is set for this output on the receiver,
you can also select from Decoder the decoder in the receiver
that is to be used to display the alarm image.
Decoder
Select a decoder of the receiver to display the alarm image. The
decoder selected has an impact on the position of the image in
a split screen. For example, you can specify via a VIP XD that
the upper-right quadrant should be used to display the alarm
image by selecting decoder 2.
SSL encryption
The data for the connection, for example the password, can be
securely transmitted with SSL encryption. If you have selected
the On option, only encrypted ports are offered in the Remote
port parameter.
You can activate and configure encryption of the media data
(video and metadata) on the Encryption page (see
Section 12.52 Encryption, page 146 ).
Auto-connect
Select the On option to automatically re-establish a connection
to one of the previously specified IP addresses after each
reboot, after a connection breakdown or after a network failure.
NOTICE!
Refer to the destination unit documentation concerning image
display options and available video outputs.
NOTICE!
Please note that the SSL encryption must be activated and
configured at both ends of a connection. This requires the
appropriate certificates to be uploaded onto the HD
Conference Dome.