Bosch SSB1000 SA, Руководство пользователя

Страница: 70 / 84

6720892984 (2019/02) US SSB
70 | Service reminder
Holding
register
Access
Description Remarks
Automatic
Conversion
Range
R W
... Reserved…
599 Reserved…
a a
REMARKS
NV Non-Volatile means that the parameter is stored in the non-volatile memory (eeprom, flash, etc). These parameters will retain their value
after a reset/power cycle. However the parameters have a limited amount of allowed write cycles (10.000 times, average of 2 times per day),
which means these parameters cannot be used for dynamic control!
V Volatile, means that the parameter is stored in the volatile memory (RAM). These parameters will lose their value after a reset/power
cycle (value will be reset to the last know setting from non-volatile memory). These parameters can be written unlimited and can be used for
dynamic control. The Error Log items can be read in blocks of 8 holding registers from error log index 0 to 47 (total 48 error log items).
K .3 .5 Service Reminder (1500 – 1550)
The Service Reminder status and settings can be read/written using the following holding registers.
To check if the Service Reminder is active, the
Hours_Till_Service
(1501) holding register should be read.
When the
Hours_Till_Service
value is 0 the service reminder is active.
Holding register
Acces
Description
Automatic
Conversion
Range
R W
Service Reminder Counters
1500 X
Hours since last service (Burn hours or operation hours,
depends on the
Service_Hour_Counter
setting).
0…65534 hours.
1501 X
Hours till service is required (Burn hours or operation
hours, depends on the
Service_Hour_Counter
setting).
0…Service_Interval
... Reserved…
Service Settings
1530 X X Reset Service Reminder. 0…1 (1=Reset).
1531 X X Service Hour Counter setting. The counted hours (1500
+ 1501) are burn / operation hours.
0=Burn hours,
1=Operation hours.
1532 X X Service Interval. 0…25500 hours (Steps of 100 hours).
1533 X X Service Shutdown Period (after service reminder is
active).
0…25500 hours (Steps of 100 hours).
NOTE: A Overdue counter value of 0xFFFF means that the counter is not available/empty.