Bosch NEI-308V05-13WE, Руководство пользователя

Страница: 43 / 124

Dinion IP Infrared Imager Configuration via IP, Basic Mode | en 43
Bosch Security Systems, Inc. User Manual F.01U.263.416 | 3.1 | 2012.09
8 Configuration via IP, Basic Mode
8.1 Basic Mode: Device Access
Camera name
You can give the camera a name to make it easier to identify.
The name makes the task of administering multiple units in
larger video monitoring systems easier, (for example, using the
VIDOS or Bosch Video Management System programs).
The device name is used for the remote identification of a unit
(for example, in the event of an alarm). For this reason, enter a
name that makes it as easy as possible to quickly identify the
location.
Password
The camera is generally protected by a password to prevent
unauthorized access to the unit. You can use different
authorization levels to limit access.
The NEI-30 camera operates with three authorization levels:
service , user and live .
The highest authorization level is service . After entering the
correct password, you can access all the functions of the
camera and change all configuration settings.
With the user authorization level, you can operate the unit and
also control cameras, for example, but you cannot change the
configuration.
The lowest authorization level is live . It can only be used to
view the live video image and switch between the different live
image displays.
You can define and change a password for each authorization
level if you are logged in as service or if the unit is not
password protected.
CAUTION!
Do not use any special characters (for example, & ) in the name.
Special characters are not supported by the internal recording
management system and may therefore result in the Player or
Archive Player being unable to play back the recording.