Bosch NEI-308V05-13WE, Руководство пользователя

Страница: 78 / 124

78 en | Configuration via IP, Advanced Mode Dinion IP Infrared Imager
F.01U.263.416 | 3.1 | 2012.09 User Manual Bosch Security Systems, Inc.
4. Click the Load... button to load a saved profile. A new
window opens in which you can select the profile file and
specify where to save the file.
VCA configuration
Select one of the profiles here to activate it or edit it.
You can rename the profile.
1. To rename the file, click the icon to the right of the list field
and enter the new profile name in the field.
2. Click the icon again. The new profile name is saved.
Alarm status
The alarm status is displayed here for information purposes.
This means that you can check the effects of your settings
immediately.
Aggregation time(s)
You can set an aggregation time of between 0 and 20 seconds if
necessary. The aggregation time always starts when an alarm
event occurs. It extends the alarm event by the value set. This
prevents alarm events that occur in quick succession from
triggering several alarms and successive events in a rapid
sequence. No further alarm is triggered during the aggregation
time. The post-alarm time set for alarm recordings only starts
once the aggregation time has expired (see
Section 9.4.2 Recording Profiles, page 69 ).
Analysis type
Select the required analysis algorithm. By default, only
is available – this offers a motion detector and
essential recognition of tampering.
CAUTION!
Do not use any special characters, for example & , in the name.
Special characters are not supported by the system's internal
recording management and may therefore result in the Player or
Archive Player being unable to play back the recording.