Bosch NEI-308V05-13WE, Руководство пользователя

Страница: 76 / 124

76 en | Configuration via IP, Advanced Mode Dinion IP Infrared Imager
F.01U.263.416 | 3.1 | 2012.09 User Manual Bosch Security Systems, Inc.
If the unit is operated behind a firewall, TCP (HTTP port)
should be selected as the transfer protocol. For use in a local
network, select UDP .
Stream
Select the stream for transmission in case of an alarm.
Remote port
Depending on the network configuration, select a browser port
here. The ports for HTTPS connections will be available only if
the On option is selected in the SSL encryption parameter.
Decoder
Select a decoder of the receiver to display the alarm image. The
decoder selected has an impact on the position of the image in
a split screen. For example, you can specify via a VIP XD that
the upper-right quadrant should be used to display the alarm
image by selecting decoder 2.
SSL encryption
The data for the connection, for example the password, can be
securely transmitted with SSL encryption. If you have selected
the On option, only encrypted ports are offered in the Remote
port parameter.
You can activate and configure encryption of the media data
(video and metadata) on the Encryption page (see
Section 9.7.5 Encryption, page 95 ).
Auto-connect
CAUTION!
Please note that in some circumstances, a larger bandwidth
must be available on the network for additional video images in
the event of an alarm, in case Multicast operation is not
possible. To enable Multicast operation, select the UDP option
for the Video transmission parameter here and on the Network
page (see Page 87 ).
NOTICE!
Please note that the SSL encryption must be activated and
configured at both ends of a connection. This requires the
appropriate certificates to be uploaded onto the camera.