Bosch NEI-308V05-13WE, Руководство пользователя

Страница: 74 / 124

74 en | Configuration via IP, Advanced Mode Dinion IP Infrared Imager
F.01U.263.416 | 3.1 | 2012.09 User Manual Bosch Security Systems, Inc.
Activating the Recording
After completing configuration you must activate the recording
scheduler and start the recording. The configuration can be
modified at any time.
You can stop the recording activity at any time and modify the
settings.
1. Click the Start button to activate the recording scheduler.
2. Click the Stop button to deactivate the recording
scheduler. Running recordings are interrupted.
Recording status
The graphic indicates the recording activity of the camera. You
will see an animated graphic while recording is taking place.
9.4.5 Recording Status
Certain details on the recording status are displayed here for
information purposes. You cannot change any of these settings.
9.5 Advanced Mode: Alarm
9.5.1 Alarm Connections
You can select how the camera responds to an alarm. In the
event of an alarm, the unit can automatically connect to a pre-
defined IP address. You can enter up to ten IP addresses to
which the camera will connect in sequence in the event of an
alarm, until a connection is made.
Connect on alarm
Select On so that the camera automatically connects to a
predefined IP address in the event of an alarm.
Number of destination IP address
NOTICE!
In the default setting, Stream 2 is transmitted for alarm
connections. Bear this fact in mind when assigning the profile
(see Section 9.3.8 Encoder Profile, page 61 ).