Bosch NEI-308V05-13WE, Руководство пользователя

Страница: 28 / 124

28 en | Ethernet Connection (IP models) Dinion IP Infrared Imager
F.01U.263.416 | 3.1 | 2012.09 User Manual Bosch Security Systems, Inc.
5 Ethernet Connection (IP models)
5.1 About the Ethernet Connection
The NEI-30 transmits video and control over a standard TCP/IP
network using the built-in web server through which users can
configure the display settings and the operating settings of the
camera, and the parameters of the network to which the
camera is connected. The NEI-30 connects to a 10 BASE-T/100
BASE-TX network either directly or via a hub. In addition, power
can be supplied to IP camera models via the Ethernet cable
compliant with Power-over-Ethernet Plus (PoE+) (IEEE 802.3at
standard).
5.2 Connecting the NEI-30 to the PC
1. Install the NEI-30 according to the instructions.
2. Make the desired connection between the Ethernet cable
and the camera.
– Option A: Connect the RJ45 connector on the camera
to a dedicated network switch to bypass the Local
Area Network (LAN), and then connect the dedicated
network switch to the RJ45 connector on the PC.
– Option B: Connect the RJ45 connector on the camera
directly to the PC.
CAUTION!
Make Ethernet connections (Cat-5e or Cat-6; maximum
distance 100 m (328 ft) ) to non-exposed (indoor) networks
only.
WARNING!
IP camera models can accept power from the 12 VDC / 24 VAC
power input or from the Ethernet input. Ensure that the camera
receives power from only one source.