Bosch NEI-308V05-13WE, Руководство пользователя

Страница: 51 / 124

Dinion IP Infrared Imager Configuration via IP, Advanced Mode | en 51
Bosch Security Systems, Inc. User Manual F.01U.263.416 | 3.1 | 2012.09
1. Check whether the correct time zone is selected. If it is not
correct, select the appropriate time zone for the system,
and click the Set button.
2. Click the Details button. A new window opens and you will
see the empty table.
3. Select the region or the city that is closest to the system's
location from the list field below the table.
4. Click the Generate button to generate data from the
database in the unit and enter it into the table.
5. Make changes by clicking an entry in the table. The entry is
selected.
6. Clicking the Delete button will remove the entry from the
table.
7. Select other values from the list fields below the table to
change the entry. Changes are made immediately.
8. If there are empty lines at the bottom of the table, for
example after deletions, you can add new data by marking
the row and selecting required values from the list fields.
9. Click the OK button to save and activate the table.
Time server IP address
Enter the IP address of a time server here to enable the camera
to receive the time signal from a time server using various time
server protocols, and then use it to set the internal clock. The
unit polls the time signal automatically once every minute.
Time server type
Select the protocol that the selected time server supports.
Preferably, you should select the SNTP server as the protocol.
This supports a high level of accuracy and is required for
special applications and subsequent function extensions.
Select Time server for a time server that works with the
protocol RFC 868.
9.1.4 Display Stamping
Various overlays or “stamps” in the video image provide
important supplementary information. These overlays can be
enabled individually and are arranged on the image in a clear
manner.