Bosch Intellic EFAS-4.10, Руководство по ремонту

Страница: 34 / 115

24
Workshop Manual
Smart Tachograph EFAS-4.10/4.11
6.4.1.1 Before activation
The printout “Technical data” of the EFAS
does not refer to a calibration purpose. There
is no information regarding the sensor.
- Time of printout
- Expression type: Technical data
- Information on the VIN consists of “?”
- Member State empty / Vehicle registration plate consists of “?”, if
no information was provided on this before activation; see 6.4.1.5
6.4.1.2 Activation
By entering a valid workshop card,
the EFAS is activated and paired with
the sensor. In this new activated state,
the printout “Technical data” of the
EFAS shows the calibration purpose (1)
(“activation”). The vehicle identification
number, registration number and
member state details are still empty, but
the printout shows information on the
workshop card and the paired sensor.
- Workshop card holder
- Coupled motion sensor
- Workshop details
- Calibration purpose (1) “Activation
The recording equipment records data in the mass storage from the time of activation and accepts other tachograph cards. EFAS
must now be calibrated (see chapter
Calibration
). However, the general settings can already be made. (see chapter
General
settings
).