D9068
|
Operation and Installation Guide | 4.0
System Operation
.
Bosch Security Systems, Inc. | 3/13 | F01U071094-0
7
29
Table 10: D7033/FMR-DACT-KEYPAD and FMR-DACT-KEYPAD Keypad Function
Key Name
Key Function
Reset
Initiates a manual reset of D9068. Refer to
for more information). Clears the character selected by the cursor. Refer
to
on page 29.
Drill
Advances to the next programmable feature or character position. Refer to
Disable
Returns to the previous programmable feature or character position. Refer
to
Test
Enters Test Mode. Pressing [Test] when entering a phone number accesses
three phone control code options. Refer to
Section
page 50 for more information.
History
History Mode. Refer to
for more
information.
3*
Increases backlight intensity. Press and hold [* Clear] first. Then press
[3] to adjust the intensity.
6*
Decreases backlight intensity. Press and hold [* Clear] first, then press
[6] to adjust the intensity.
# Command
Accepts programming entries into D9068. Press this key after every
programming entry.
0* Program
Enters the Programming Mode menu. Refer to
Secti
for programming instructions.
* Clear
Cancels any programming menu without making changes. Return to the message
SYSTEM NORMAL by pressing [* Clear] until SYSTEM NORMAL appears across the
first line.
4
1
Decreases keypad sounder volume. Press and hold [* Clear] first, then
press [4] to adjust the volume.
1
1
Increases keypad sounder volume. Press and hold [* Clear] first, then
press [1] to adjust the volume.
* In addition to key value.
Figure 19: Additional Functions of the
[Drill], [Disable], and
[Reset] Keys
2
1
PHN NMBR 1: 5551
234????????????
PHN NMBR 1: 5551
234????????????
PHN NMBR 1: 5551
234????????????
PHN NMBR 1: 5551
234????????????
PHN NMBR 1: 5551
234????????????
PHN NMBR 1: 5?51
234????????????
Drill
Disable
Reset
3
1 - Press [Drill] to advance the cursor
to the next position.
2 - Press [Disable] to move the cursor
back one position.
3 - Press [Reset] to clear the character
that is currently selected.
4.4.2 Scrolling Menus
When properly connected to the D9068, the
keypad shows a scrolling menu of possible
user actions along its second line. This
scrolling menu is the D9068 Main Menu.
The scrolling menu items flash one at a
time at 1-sec intervals through the list
and then start over. When the system is
operating normally, SYSTEM NORMAL appears
in the first line on the LCD display
(refer to
Figure 20: Scrolling Main Menu
SYSTEM NORMAL
0: PROGRAM
1: STATUS
2: HISTORY
3: TEST
4: RESET
1
1 - Scrolling items