D9068
|
Operation and Installation Guide | 5.0 Programming
32
Bosch Security Systems, Inc. | 3/13 | F01U071094-0
7
4.5 Reset
Reset the D9068 in one of four ways:
1.
At the LCD remote keypad, press [4] to
select
Reset
from the Main Menu or
press [Reset]. Pressing either key
resets the D9068 only when
off-normal conditions are present. The
system sends an Open Reset Report with
the user ID parameter of 99.
2.
Exit from the Test Mode. The system
sends an Open Reset Report with the
user ID parameter of 99.
3.
Exit from the Programming Mode. The
system sends an Open Reset Report with
a user ID parameter of 01.
4.
Power up the D9068. No Open Reset
Report is sent.
5.0 Programming
5.1 Using the Keypad
Use the D7033/FMR-DACT-KEYPAD Keypad
Programmer to do all programming for the
D9068. To properly program the D9068, you
must always press the [# Command] and
[* Clear] keys in addition to the key(s)
necessary to make specific programming
entries.
Press [# Command] to accept an entry
into the D9068.
Press [* Clear] after pressing
[# Command] to return to the submenu
or menu selections.
programming key sequence for setting the
D9068 operational date.
Figure 25: Programming Key Sequence for
System Date
1
1
0
Program
ENTER DATE
MMDDYY: 010100
#
Command
*
Clear
1
2
3
4
5
6
1 - Press [0 Program] to enter the
Programming Mode Menu.
2 - Press [1] to enter the Prog Time
submenu.
3 - Press [1] again to select
SYSTEM
for
the system
date and time.
4 - Enter the current date using the
keypad keys [0] to [9].
5 - Press [# Command] to enter the date
into the system.
6 - Press [* Clear] to move to the next
menu item, or to return to previous
menus.
When you enter the Programming
Menu (Level 2), you no longer
need to press [0] to re-enter
the Programming Menu. If you
press [0] while in the
Programming Menu, the keypad
emits a three-beep error tone.