Bomag BW 100 AC-4, Руководство по эксплуатации

Страница: 23 / 126

Safety regulations
BOMAG 23 BW 100/120/125 AD-4/AC-4
Do not refuel in closed rooms.
No open fire, do not smoke.
Do not spill any fuel. Catch running out fuel, do not
let it seep into the ground.
Wipe off spilled fuel. Keep dirt and water away
from the fuel.
A leaking fuel tank can cause an explosion. En-
sure tight fit of the fuel tank cover, if necessary re-
place immediately.
Fire protection measures
Familiarise yourself with the location and the oper-
ation of fire fighting equipment. Observe all fire re-
porting and fire fighting possibilities.
Mounting and removing the chip
spreader
1
When mounting or removing the chip spreader do
not step between the chip spreader and the ma-
chine while the engine is running.
Park the machine on a level and solid base to
mount or remove the chip spreader and shut down
the engine.
Mount and remove the chip spreader when it is
empty.
Maintenance
Observe the maintenance tasks described in the
operating and maintenance instructions, including
the exchange of parts.
Maintenance work must only be carried out by
qualified and authorized personnel.
For overhead service and assembly work use the
provided access installations or any other safe ac-
cess ladders and work platforms. Do not use ma-
chine parts as access steps.
Keep unauthorized persons away from the ma-
chine.
Do not perform maintenance work with the ma-
chine driving or the engine running.
Park the machine on horizontal, level and stable
ground.
Pull the key out of the ignition switch.
Lock the articulated joint with the articulation lock.
Working on hydraulic lines
Always depressurize the hydraulic lines before
starting to work on them. Hydraulic oil escaping
under pressure can penetrate the skin and cause
severe injury. If injured by hydraulic oil seek med-
ical advice immediately as otherwise severe infec-
tions may result.
When adjusting the hydraulic system do not stand
behind or in front of the drum/wheels.
Do not change the setting of high pressure relief
valves.
Drain hydraulic oil at operating temperature - dan-
ger of scalding!
Catch running out hydraulic oil and dispose of en-
vironmentally.
Always catch and dispose of biological hydraulic
oils separately.
Do not start the engine after draining off the hy-
draulic oil.
After finishing work (with the system still depressu-
rized!) check all connections and fittings for leaks.
Changing hydraulic hoses
All hydraulic hoses must be inspected visually at
regular intervals.
Hydraulic hoses must be changed immediately if:
l
the outer layer is worn down to the metal lining
(e.g. chafing, cuts, cracks)
l
embrittlement of the outer layer (development
of cracks in the hose material)
l
deformation under pressurized and depressu-
rized condition, which are not in accordance
with the normal shape of the hydraulic hose
l
deformation in bends, e.g., squeezes, kinks,
layer separation, formation of blisters
l
leakages.
l
non-observance of the installation require-
ments.
l
separation of the hydraulic hose from the fit-
ting
l
corrosion of the fitting, which impairs the func-
tion and the strength.
l
Do not mix up hoses by mistake.
l
damage or deformation of the fitting, which im-
pairs the function and strength of the hose/
hose connection.
1 Optional equipment