Bomag BW 100 AC-4, Руководство по эксплуатации

Страница: 107 / 126

Every 2000 operating hours
BOMAG 107 BW 100/120/125 AD-4/AC-4
l
Examine the surface of the filter element thor-
oughly for any visible dirt.
l
Take out the old filter element and clean filter
bowl and thread.
l
Reassemble the filter bowl with a new filter el-
ement and new loop rings (1) and (2).
l
After a short test run check the filter for leaks.
6.31 Changing the coolant
Danger
!
Danger of scalding!
Change the coolant only when the engine is
cold.
Do not remove the radiator cap when the en-
gine is still hot.
Always wear gloves when handling anti-freeze
agent.
Caution
!
Always screw the radiator cap tightly back on
(second detent).
Always fill the engine cooling system with an
anti-freeze mixture (corrosion protection).
Do not use more than 50% anti-freeze.
Do not mix different coolants and additives of
any other kind. If necessary flush the cooling
system 2-3 times with clear water.
For coolant quality refer to the "table of fuels
and lubricants".
Environment
Catch running out coolant and dispose of envi-
ronmentally.
Fig. 172
l
Remove the radiator cap (Fig. 172).
l
Disassemble the left hand side plate from the
front frame.