Body Solid G5S, Руководство по сборке, Страница: 6 / 39

Be careful to assemble all components
in the sequence they are presented.
mm
Inch
3
A. Above the Pec Dec Frame (G) connect the Leg Extension Frame (H) to Angled Support
Frame (E) using:
Two 43 (1/2” x 3 1/4” hex head bolt)
Four 57 (1/2” washer)
Two 55 (1/2” nylon lock nut)
B. Attach the Leg Extension Frame (H) to Main Base Frame (A) using:
One 40 (1/2” x 5 1/2” hex head bolt)
Two 57 (1/2” washer)
One 55 (1/2” nylon lock nut)
C. Attach Left Pec Dec Arm (J) to Pec Dec Frame (G) using:
One 45 (1/2” x 3/4” hex head bolt)
One 57 (1/2” washer)
Attach Left Pec Dec Handle (K) to Left Pec Dec Arm (J) using:
One 64 (5/16” x 3/4” round allen head bolt)
One 60 (5/16” spring lock washer)
D. Attach Right Pec Dec Arm (L) to Pec Dec Frame (G) using:
One 45 (1/2” x 3/4” hex head bolt)
One 57 (1/2” washer)
Attach Right Pec Dec Handle (M) to Right Pec Dec Arm (L):
One 64 (5/16” x 3/4” hex head bolt)
One 60 (5/16” spring lock washer)
E. Attach two Chrome Round End Cap (34) to the top of the Left Pec Dec Handle (K) and one to the
top of the Right Pec Dec Handle (M) as shown, and tighten Allen Screw (67).
Attach two Chrome Collars (35) one to the bottom of the Left Pec Dec Handle (K) and one to the
bottom of the Right Pec Dec Handle (M) as shown, and tighten Allen Screw (27).
F. Attach one Rubber Stop (23) to the front of Leg Extension Frame (H).
Attach two Rubber Stops (23) to the Pec Dec Frame (G).
Attach one Rubber Stop (23) to the horizontal pillar sticking out of the Angled Support Frame (E)
as shown.
6
NOTE:
Finger tighten all hardware in this step. Do Not wrench tighten until end of step 7.
S T E P