Body Solid G5S, Руководство по сборке, Страница: 12 / 39

6
Be careful to assemble all components
in the sequence they are presented.
mm
Inch
A. Attach two Convex End Caps (3), one to the top and one to the bottom, of Leg Extension Arm (Y).
Attach Leg Extension Arm (Y) to Leg Extension Frame (H) using pre-installed Shaft (77) as
shown. Tighten the two Allen Screws (27) to lock down Shaft (77) in Leg Extension Frame (H).
Attach Convex End Cap (3) to the front of Leg Extension Frame (H) as shown.
B. Attach Leg Extension Pad Holder (Z) to Leg Extension Arm (Y) using:
One 43 (1/2” x 3 1/4” hex head bolt)
Two 57 (1/2” washer)
One 55 (1/2” nylon lock nut)
C. Attach the two Leg Pads (ZA) to Leg Extension Pad Holder (Z) using:
Four 94 (5/16” x 3/4” hex head bolt)
Four 60 (5/16” spring lock washer)
Four 59 (5/16” washer)
D. Attach two 1” X 2” Curved End Caps (6) to the front and back of the Leg Extension Seat Pad
Frame (ZC) as shown.
Attach Leg Extension Seat Pad (ZB) to Leg Extension Seat Pad Frame (ZC) using:
Two 51 (5/16” x 1 3/4” hex head bolt)
Two 60 (5/16” spring lock washer)
Two 59 (5/16” washer)
E. Slide Plastic Bushing (79) into Leg Extension Frame (H) as shown.
Attach Hydraulic Seat Adjuster (88) to the bottom and inside the receptacle in the Leg Extension
Frame (H) using:
One 47 (3/8” x 3” hex head bolt)
Two 58 (3/8” washer)
One 56 (3/8” nylon lock nut)
F. Slide Leg Extension Seat Pad Frame (ZC) into Plastic Bushing (79) in Leg Extension Frame (H)
and attach to the top of Hydraulic Seat Adjuster (88) using:
One 48 (3/8” x 2 3/4”hex head bolt)
Two 58 (3/8” washer)
One 56 (3/8” nylon lock nut)
Insert T-Shaped Pop Pin (26) into the threaded opening in the Leg Extension Frame (H).
G. Attach Foam Roller Bar (75) to the front of the Leg Extension Seat Pad Frame (ZC) as shown.
Slide Foam Rollers (17) onto Foam Roller Bar (75). Hold in place with 3” Plastic Washer (21), on
the inside, and Roller End Caps (8) on the outside.
12
NOTE:
Finger tighten all hardware in this step. Do Not wrench tighten until end of step 7.
S T E P