Body Solid G5S, Руководство по сборке, Страница: 4 / 39

2
Be careful to assemble all components
in the sequence they are presented.
mm
Inch
A. Attach Angled Support Frame (E) to Main Base Frame (A) using:
Two 43 (1/2” x 3 1/4” hex head bolt)
Four 57 (1/2” washer)
Two 55 (1/2” nylon lock nut)
B. Insert Convex End Cap (4) to the front of the Top Frame (F).
Attach Top Frame (F) and Plate (86) to the Rear Vertical Frame (C) using:
Two 43 (1/2” x 3 1/4” hex head bolt)*
Three 57 (1/2” washer)
One 55 (1/2” nylon lock nut)
*NOTE:
The top bolt (43) goes into an internally threaded nut inside the Top Frame (F).
C. Attach Top Frame (F) and Plate (86) to Angled Support Frame (E) using:
Two 41 (1/2” x 4 1/4” hex head bolt)
Four 57 (1/2” washer)
Two 55 (1/2” nylon lock nut)
D. Attach Pec Dec Frame (G) to Angled Support Frame (E) in the bottom two holes as shown using:
One 42 (1/2” x 3 3/4” hex head bolt)
Two 43 (1/2” x 3 1/4” hex head bolt)
Five 57 (1/2” washer)
Two 55 (1/2” nylon lock nut)
Attach two Curved End Caps (3) to Pec Dec Frame (G) as shown.
4
NOTE:
Finger tighten all hardware in this step. Do Not wrench tighten until end of step 7.
S T E P