Boca Systems M144PA, Руководство пользователя

Страница: 47 / 64

47
otherwise only LAPM will be attempted. If configured for -
J0 and a protocol connection is not made, the modem will
hang up. If configured for -J0 and a protocol connection is
not made, the modern will fail back to Speed Buffering
Mode.*
n = 4 V.42 Reliable—The modem attempts to negotiate LAPM error
correction, hanging up if it fails.
NOTE: 300 bps does not support synchronous operation. The modem
will automatically fall back to MNP asynchronous operation.
\O Originate Reliable Link: (none)
In Normal Mode (\N0), the modem will attempt to originate an MNP link,
regardless of whether the modem originated or answered the telephone
call (physical connection). The remote modem must answer the MNP link
request for the link to be established (refer to the \U command).
\Qn Set Serial Port Flow Control: (3)
This command specifies the DTE-to-modem flow control. Software flow
control uses the XOFF (13 hex) and XON (11 hex) characters to stop and
start data transmission, respectively, both to and from the DTE.
Unidirectional hardware flow control uses the CTS control line to stop/
start data from the DTE only, while bi-directional hardware flow control
also uses the RTS control to stop/start data from the modem.
n = 0 Disables flow control
n = 1 XON/XOFF software flow control
n = 2 Unidirectional hardware flow control
n = 3 Bi-directional hardware flow control *
\Tn Set Inactivity Timer: (0)
During a normal or reliable connection, if no data is sent or received
within the inactivity time period, the link will be disconnected. The default
of zero disables this feature.
n = 0-90 Length in minutes
n = 0 Disables Inactivity Timer