Boca Systems M144PA, Руководство пользователя

Страница: 35 / 64

35
! Flash Hook: Causes the modem to go on hook for 0.75
seconds.
@ Wait for Quiet Answer: Causes the modem to wait for specified
amount of time (S-Register S7) followed by 5 seconds of
silence before processing the next dial modifier.
; Return to Idle State: Causes the modem to enter On-line
Command Mode without initiating a data modem handshake
(used for phone directory auto-dialers).
-() Ignored by Modem: These four characters are ignored by the
modem, but space may be included in the dial string for
separating area codes and numbers.
En Command Mode Echo: (1)
This command selects whether the modem echoes ‘AT’ commands back
to the host in either On-line or Off-line command Mode.
n = 0 Echo disabled
n = 1 Echo enabled *
Fn On-line Echo: (1)
This command is normally used to select whether the modem echoes
data back to the host during On-line Data Mode. This device set does not
support On-line Data Mode echo.
n = 0 Echo enabled (returns an ERROR message)
n = 1 Echo disabled *
Hn Switch Hook Control: (0)
This command is used to control the telephone line relay (OHREL*) and
causes the modem to either hang-up or pick-up the telephone line.
n = 0 Hang-up telephone line (go on-hook)*
n = 1 Pick-up telephone line (go off-hook)