Boca Systems M144PA, Руководство пользователя

Страница: 34 / 64

14.4 BOCAMODEMcard-PC
34
D Dial Command: (none)
This command causes the modem to immediately go off-hook as an
originating modem and dial a telephone number with corresponding dial
modifiers. Dial modifiers are parameters that define how the modem
should dial the telephone number.
Dial Modifiers:
0 to 9 Dialing Digits
A, B, C, Tone Dial Characters
D,*,#
P Pulse Dial: Configures the modem to use pulse dialing to dial a
telephone number.
R Reverse Originate Mode: Places the modem in Answer Mode.
This modifier should be the last character in the dialing string
(e.g., ATDT 123-45678 R)
S=n Dial NVRAM Telephone Number: Causes the modem to dial a
telephone number previously stored in the NVRAM with the
AT&Zn = x command.
T Tone Dial: Configures the modem to use DTMF tones to dial a
telephone number.
W Wait for Dial Tone: Causes the modem to look for dial tone
for a specified amount of time. if dial tone or the amount
of time specified by the S-Register S6 times-out, the modem will
then process the next command in the dial string. If a busy
signal is detected, the modem will respond back to the DTE with
a busy response code, and then go into Off-line Command
Mode.
, Pause: Causes the modem to pause or delay implementing the
next parameter in the dial string by the time specified inS-
Register S8.