BMW I01, Информация о продукте

Страница: 48 / 190

I01�High-voltage�Components
3.�Electric�Motor
42
2 Move�the�driving�shaft�of�the�parking�lock�into�the�locking�position�for�"Parking�lock�disengaged",
if�necessary.�by�moving�70°�anti-clockwise.
3 Install�the�new�parking�lock�module.
An�emergency�operation�of�the�parking�lock�module�is�not�intended��The�I01�cannot�be�towed�away.�It
can�only�be�transported�on�a�loading�platform.
3.3.�Drive�control
The�electric�motor�of�the�I01�is�a�distributed�system�with�a�variety�of�components.�This�is�also
discernible�in�the�electronic�part,�the�drive�control,�because�several�components�(control�units)�are�also
involved�here.�The�master�role�for�the�control�of�the�electric�motor�in�the�I01�is�assumed�by�the�engine
control.�It�is�modelled�after�vehicles�with�a�gasoline�engine�with�"Electrical�Digital�Motor�Electronics"
EDME.
Installation�location�of�the�EDME
As�the�most�important�partner�control�unit�of�the�EDME,�the�electrical�machine�electronics�assumes
the�activation�of�the�electrical�machine�and�the�supply�of�energy�to�the�low-voltage�vehicle�electrical
system.�Other�partner�control�units�of�the�EDME�include�the�battery�management�electronics�SME
and�the�convenience�charging�electronics�KLE.
3.3.1.�System�overview
The�following�graphics�shows�the�electrical�connection�of�the�key�components�of�the�drive�control.