BMW I01, Информация о продукте

Страница: 109 / 190

I01�High-voltage�Components
6.�Charging�the�High-voltage�Battery
103
• Only�use�power�sockets�protected�against�moisture�and�weathering
• Do�not�touch�contact�areas�of�power�sockets�with�fingers�or�objects
• Never�repair�or�modify�a�charging�cable�yourself
• Remove�cable�on�both�sides�before�cleaning.�Do�not�immerse�in�fluids.
• Do�not�go�through�a�car�wash�during�charging
• Only�charge�at�power�sockets�checked�by�an�electrician
• Observe�special�information�in�the�operating�instructions�for�charging�at�unknown�or�unfamiliar
infrastructure/power�sockets.�Set�the�charging�current�in�the�vehicle�to�"low".
6.2.4.�Charging�socket�at�the�vehicle
The�charging�socket�at�the�I01�is�located�precisely�where�the�fuel�filler�neck�is�located�in�a
conventional�vehicle�with�a�combustion�engine.�Just�like�the�fuel�filler�flap�has�to�be�opened�in�a
conventional�vehicle,�the�charging�socket�cover�also�has�to�be�opened�in�the�I01.�Press�the�charging
socket�cover�to�operate�the�release�button�and�unlock�the�charging�socket�cover.�The�actual�charging
socket�is�then�protected�against�moisture�and�dirt�contamination�by�another�lid.�The�charging�socket
satisfies�the�protection�class�IP5K5.�The�charging�socket�cover�and�the�connector�assignment�are
shown�in�the�following�graphic.
Charging�socket�at�the�vehicle�for�combo�charging,�type�1�(US�market)