BMW I01, Информация о продукте

Страница: 118 / 190

I01�High-voltage�Components
6.�Charging�the�High-voltage�Battery
112
Index Explanation
1 Electric�motor�for�locking�the�charging�socket�cover
2 Locking�hook
3 Bowden�cable�for�the�emergency�operation�of�the�charging�socket�cover
The�charging�socket�cover�is�held�closed�by�a�spring-activated�locking�hook.�The�locking�hook�is�a�part
of�the�central�locking�drive�for�the�charging�socket�cover.�The�unlocking/locking�of�the�charging�socket
cover�is�effected�using�an�electric�motor.�This�electric�motor�is�activated�by�the�LIM.�The�request�for
unlocking/locking�the�charging�socket�cover�comes�from�the�BDC.
A�microswitch�is�also�installed�in�the�central�locking�drive.�The�status�of�the�microswitch�(actuated/
not�actuated)�provides�information�on�the�status�of�the�charging�socket�cover�(open/closed).�In
rest�position,�i.e.�when�the�charging�socket�cover�is�closed,�the�microswitch�is�not�actuated.�The
microswitch�is�actuated�when�the�charging�socket�cover�is�open.�The�microswitch�is�also�actuated
when�the�charging�socket�cover�is�pressed�and�held.
In�the�event�of�an�electrical�fault,�e.g.�failure�of�both�the�charging�socket�cover�and�the�DC�charging
plug�can�be�unlocked�manually.
Emergency�release�buttons
Index Explanation
1 Button�for�the�emergency�release�of�the�charging�socket�cover
2 Button�for�the�emergency�release�of�the�DC�charging�plug
The�rear�door�on�the�side�on�which�the�charging�socket�cover�is�located�must�be�opened.
When�the�rear�door�is�open�two�blue�buttons�are�visible�in�the�lower�area.�To�unlock�the�charging
socket�cover�the�upper�blue�button�must�be�pulled.
The�DC�charging�plug�is�unlocked�by�pulling�the�lower�blue�button.