BMW I01, Информация о продукте

Страница: 114 / 190

I01�High-voltage�Components
6.�Charging�the�High-voltage�Battery
108
Coordinating�the�charging�procedure
The�LIM�control�unit�coordinates�the�start�and�finish�of�the�charging�procedure.
There�are�two�actions�required�by�the�customer�at�the�start�of�the�charging�procedure:
1 Set�the�start�time�for�charging
2 Connect�the�charging�cable.
Using�the�controller�and�the�menu�in�the�central�information�display�CID�the�customer�can�set�and
adjust�the�start�time�for�charging�in�the�vehicle.�The�customer�has�a�second�range�of�adjustment�with
the�"BMW�i�Remote�app"�for�the�iPhone™.�The�customer�can�select�to�start�the�charging�procedure
immediately�after�connecting�the�charging�cable�or�specify�a�time�at�which�the�charging�procedure
should�start.
BMW�i�Remote�app:�Charging�the�high-voltage�battery
Index Explanation
1 Settings�for�charging,�e.g.�departure�time
2 Switching�climate�control�on/off�at�departure�time
3 Switching�charging�on/off�at�reasonable�electricity�rate
If�the�customer�connects�the�charging�cable,�the�LIM�control�unit�wakes�up�the�control�units�in�the
vehicle�electrical�system�(if�they�have�not�already�been�woken�up�by�another�event).�The�LIM�control
unit�uses�the�wake-up�line�wired�directly�to�the�BDC�control�unit.�Then�the�LIM�control�unit�checks�the
functional�prerequisites�for�charging�and�receives�information�about�the�conditions�relevant�for�safety
via�the�powertrain�CAN.