BMW I01, Информация о продукте

Страница: 107 / 190

I01�High-voltage�Components
6.�Charging�the�High-voltage�Battery
101
The�charging�cable�is�used�to�join�the�following�components:
• Specific�national-market�connection�for�household�power�socket�with�protective�contact
• Plug�connection�between�specific�national-market�connector�and�"In-Cable�box"
• "In-Cable�box"�(EVSE)
• Plug�connection�between�"In-Cable�box"�and�connector�for�vehicle�connection
• Connector�for�vehicle�connection.
The�charging�cable�is�the�electrical�connection�between�the�AC�voltage�network�and�the�direct�current
voltage�high-voltage�electrical�system�of�the�vehicle.�The�connection�to�the�AC�voltage�network�is
effected�at�a�typical�household�power�socket�with�protective�contact,�which�does�not�include�Electric
Vehicle�Supply�Equipment.�In�this�case�the�switching�and�functions�of�the�Electric�Vehicle�Supply
Equipment�are�integrated�in�the�charging�cable.�This�is�called�an�"In-Cable�box".�This�charging�cable
for�the�I01�is�always�designed�for�single-phase�supply,�in�line�with�the�charging�socket�at�the�vehicle
(phase L1�and�neutral�conductor N)�and�always�includes�the�protective�earth PE,�as�well�as�the�pilot
and�proximity�line.�The�connector�is�designed�so�that�the�connection�is�first�made�with�the�protective
contact.�The�ground�is�grounded�via�the�protective�earth.
The�charging�cable�can�be�housed�in�the�charging�cable�compartment�under�the�engine�compartment
lid.
Please�consult�the�operating�instructions�of�the�respective�manufacturer�for�the�operation�and�use�of�a
charging�cable�with�an�integrated�EVSE.
Employees�in�BMW�Service�cannot�perform�any�maintenance�or�repair�work�on�the�charging�cable
or�the�EVSE.�In�the�event�of�a�defect�with�or�a�malfunction�of�the�charging�cable�or�the�EVSE,�the
manufacturer�must�be�contacted.
Menu�for�the�setting�of�the�current�level