Blue Bird TC/2000, Руководство пользователя

Страница: 48 / 111

47
ENTRANCE DOOR GLASS REPLACEMENT
1. Apply pressure against glass from the outside of the bus, starting at a corner and push glass and
glazing rubber off of metal flange.
2. Remove glazing rubber from around glass.
3. Put glazing rubber on new glass.
4. Wrap a cord around the glazing rubber and rest the glass on the bottom flange of the opening from
outside the bus.
5. Pull cord slowly and work glazing rubber onto metal flange.
6. Apply pressure to glass from inside of bus to assure proper seal.
WARNING: When replacing broken or damaged glass, use extreme care at all times to prevent personal
injury. This includes the use of proper replacement parts, tools and personal protective equipment, such
as gloves and safety goggles.
REAR VISION GLASS REPLACEMENT
1. Remove filler strip from channel in glazing rubber.
2. Apply pressure against glass from the outside of the bus starting at a corner and push glass and
glazing rubber off of metal flange.
3. Remove glazing rubber from glass.
4. Put glazing rubber on new glass.
5. Apply a soapy solution to the flange on the bus body and to the filler strip channel on glazing rubber.
This acts as a lubricant for easier installation. Wrap a cord around the glazing rubber and rest glass on
bottom window flange from the inside of the bus body.
6. Apply pressure from the inside of the bus body to insure glass is seated properly. Pull cord slowly and
work glazing rubber onto the window flange.
7. Using filler strip tool, insert filler strip into channel on glazing rubber. (Filler strip tool is available
from your distributor.)
8. Apply clear caulking around glass and window flange on the outside of bus body to insure that no
leaks occur.
Step 6 Step 7