Blue Bird TC/2000, Руководство пользователя

Страница: 11 / 111

10
SEATS & SEAT BELTS
DRIVERS SEAT
The driver’s seat may be adjusted fore and aft by pushing forward the release lever located beneath the
seat at the center right side, adjusting the seat, and releasing the lever when the seat is in the desired position.
To raise or lower the seat, release two height adjustment handles by turning counterclockwise. Raise the seat
by lifting it to the desired position. Lower the seat by depressing the height adjustment pedal to release the
latch mechanism. Retighten the adjustment handles after the seat is in the desired position.
WARNING: Do not attempt to adjust seat while
vehicle is in motion. Do not adjust height ad-
justment while sitting in driver’s seat. Keep feet
and other items away from height adjustment
handles and pedals while vehicle is in motion.
DRIVER'S SEAT LUBRICATION
Moving parts of the driver’s seat require lu-
brication for ease of operation, as well as, lon-
gevity of the seat and prevention of excessive
wear.
Currently available white lithium-based
grease in an aerosol can, gives excellent cover-
age, when carefully directed into moving part
joints. The very light coating of lubrication pro-
vided by aerosol-carried solvent-type solution
works very well for penetrating into a joint and
cleaning away dirt, but should only be depended
on for lubrication, if frequently applied. A com-
mon 10W30 or 10W40 motor oil will provide good
lubrication.
Remember that all moving part joints, tilt piv-
ots, slide forward/back adjustment and vertical
motion pivots (4 total) require lubrication. This
should be done every six months or 6,000 miles,
whichever occurs first, with a lithium-based
grease in aerosol form.
DRIVER’S SEAT BELT OPERATION
Driver’s seat belt should be worn at all times when the vehicle is being driven.
Blue Bird driver’s seat belts have automatic locking retractors and are self-adjusting. They also have an
anti-cinch device which prevents the belt from uncomfortable tightening as you drive. To use, withdraw
ample length of belt from retractor or retractors to allow engagement of buckle halves. Engage buckle halves
and allow retractor to withdraw belt to a snug fit. Attempt to pull belt from retractor after it has been with-
drawn to assure the automatic locking mechanism is operating properly.
The buckle can be released by pushing button in center of buckle.
PASSENGER SEAT BELT OPERATION IF SO EQUIPPED
Individual lap belts for passengers are retractable or non-retractable depending on option ordered. Insert
the catch into the buckle, test for assurance of latch fit and pull loose end of strap until belt fits snugly across
the lower hips. The buckle can be released, by pushing button in center of buckle. The adjustable end can be
moved outward on its strap by turning 90 degrees to the strap and pulling.
FORE & AFT
RELEASE LEVER
HEIGHT
ADJUSTMENT
PEDAL
HEIGHT
ADJUSTMENT
HANDLES