08-04-2016
Page 1 of 6
PO Box 3785
Mooresville, NC 28117
888-438-5767
M7 Speed AGS-R2 Ram Air Intake System
56-311701-Fiberglass Housing
56-311801-Carbon Fiber Housing
FOR YOUR SAFETY INSTALL THIS PRODUCT ONLY WHEN THE ENGINE IS COLD. THIS WILL
PREVENT BURNING YOURSELF AND PREVENT THE HOLES IN THE ALUMINUM FROM
STRIPPING OR CROSS THREADING.
M7 Speed engineers and manufactures the highest quality and best fitting Mini Cooper accessories
and performance parts available anywhere on Planet Earth! Please inspect your parts when you
receive them to verify everything is included and no damage has happened during shipment. Read
these instructions completely BEFORE attempting to install this product. If you are not confident you
can do the work described or do not have the tools or skills necessary please contact a local M7
dealer (listed on or website
) or a local automotive accessory installation center to
perform this work. We acknowledge not everything is perfect but we work very hard every day to
improve our products and make installations easier. If you have any comments please contact M7
Customer Service directly at 704-663-0094. We encourage and welcome all criticism Good or Bad.
Thank you.
Tools & Supplies Required:
•
T-25 Torx
•
T-27 Torx
•
1/8” hex
•
3/8” combination wrench
•
10mm socket
•
5 mm Hex
•
Flathead Screwdriver
•
Phillips Screwdriver
•
Foamy window cleaner or similar
product
•
MAF sensor cleaner (optional)
•
Anti-seize or copper slip
Estimated Install Time (Actual time may vary):
30-60 minutes
Parts Checklist
1 AGS-R2 Airbox with cover
1 Pre-Oiled Foam Filter
1 Silicone Elbow
1 AGS-R2 Hardware & Installation Kit #90-1050
