background image

INSTALLATION MANUAL

AUDI  A4 - 2000-2002

AUDI  S4 - 2000-2002

AUDI A6 - 2000-2005

AUDI-ALLROAD - 2000-2005

Mount Location:

 To  the Right of the Radio

FOR

MVM

Multi Vehicle Mount

MVM-45-05

Thank you for purchasing your new Bracketron 

MVM 

Multi Vehicle Mount.

The  Multi Vehicle Mount is an (end user-installer) modifi able professional mounting 

bracket for most all mobile electronics requiring a steady and secure installation in a mo-

tor vehicle. The MVM installs behind your vehicles dash panel using existing or non-vis-

ible holes and is designed to cleanly protrude out from your vehicle’s dash panel.

Before installing, you must take the time to read and understand this installation manual 

and read all the warnings accompanying this product.

Instructions Include: 

 tools needed for install, directions for dash panel removal, directions 

for modifying the MVM if required.

You can download this manual and any updates from

http://www.bracketron.com/downloads

Includes PHS-203 Ultra Slim Swivel

Summary of Contents for MVM Multi Vehicle Mount MVM-45-05

Page 1: ... and secure installation in a mo tor vehicle The MVM installs behind your vehicles dash panel using existing or non vis ible holes and is designed to cleanly protrude out from your vehicle s dash panel Before installing you must take the time to read and understand this installation manual and read all the warnings accompanying this product Instructions Include tools needed for install directions ...

Page 2: ...e radio between the radio and the dash pad This causes the radio to sit very tightly in the cavity To loosen this seal and allow the radio to slide out easier we recommend using a Dash Trim Tool to wedge between both the right and left sides of the radio dash pad Carefully wiggle the tool to loosen the radio slightly Grasp the four DIN tools and slide the radio out of its cavity just enough to all...

Page 3: ...ll be no steps to follow on this page PLEASE NOTE Bracketron Inc 2006 All rights reserved The information in this document is subject to change without notice Bracketron Inc assumes no responsibility for any errors that may appear in this document nor do we assume any liability in connection with its use This supersedes and voids all previous literature Please contact the sales department for addi...

Page 4: ...se over time you can grasp the swivel and pull toward you lightly while rotating it clockwise This will tighten the swivel allowing you to create the desired tension needed Picture 3 Attach the AMPs T Notch Adapter to the front half of the swivel using the M4x12 Pan Head screws Attach the M4 Star Washers and M4 Hex Nuts to the screws and tighten the plate down with the 2 screwdriver and 9 32 open ...

Reviews: