16
Mirrors should be cleaned weekly or more often if conditions warrant. Cleaning should be done with an
ammonia solution to ensure that mirrors are not obstructed. Be sure that mounting fasteners are kept tight so
that mirrors will not vibrate. Check weekly and retighten, if necessary.
MIRROR DEFROSTING
Use the electric defrost switch to defrost outside mirrors for better visibility when conditions warrant.
The pilot light in the shifter panel indicates when the system is in use. There is a built in timer to shut the
system off automatically in 6.5 minutes.
WARNING: A convex mirror has a curved surface and is designed to provide a wide view with minimum
distortion. However, persons or objects seen in a convex mirror will look smaller and appear farther away
than when seen in a flat mirror or viewed directly. Therefore, use care when judging the size or distance of
a person or object seen in a convex mirror. Wait until you can view the person or object in a flat mirror or
in direct view to determine there size and distance.
7 6 5 4 3 2 1
HEA
TER
UPPER ASSY
.
RIGHT
M1
M2
HEA
TER
LOWER ASSY
.
RIGHT
M1
M2
7 5 3 1
6 4 2
UPPER
LOWER
RIGHT SWITCH
7 6 5 4 3 2 1
HEA
TER
LEFT
UPPER ASSY
.
M1
M2
HEA
TER
LEFT
LOWER ASSY
.
M1
M2
UPPER
LOWER
LEFT SWITCH
7 5 3 1
6 4 2
IGNITION
IGNITION
12V
12V
12V
HEATER
With Heater
Wiring Diagram
Part #
50.164.155 R.H.
50.164.336 R.H.
50.167.60 L.H.
50.167.160 L.H.
50.165.00
50.166.00
Harness Length
50.164.155 R.H.
50.164.336 R.H.
50.167.60 L.H.
50.167.160 L.H.
Control Switch
Right
Left
