30
HEATER WATER CAPACITY CHART
Note:
Water capacity of heaters includes tubing within heater enclosure.
Description
Capacity (Quarts)
78 Front Heater
3.06
12 Driver’s Heater
.25
40 Front Underseat Heater
1.56
80 Rear Underseat Heater
2.34
1 Foot of Connecting Line
.17
Example:
Unit with 190 HP Cummins 5.9TA
Driver’s Heater
.25
Front Heater
3.06
40 Front Underseat
1.56
80 Rear Underseat
2.34
76 Ft. of Heater Pipe
with 0.17 quarts per foot
12.92
17.13 qts. in Heating System
Capacity of 190 HP Cummins 5.9 TA coolant system
+ 15.00 qts. in Engine
32.13 qts. Total Capacity
WINDOWS AND WINDSHIELDS
WINDSHIELD GLASS REPLACEMENT
The windshield is two-piece curved.
1. Remove vertical filler strip in glazing rubber on each side of bro-
ken glass; remove horizontal filler strip in glazing rubber on top
and bottom of broken glass. It will be necessary to cut the hori-
zontal filler strip after it is pulled past the glass.
2. Starting at a corner, push glass free of glazing rubber from inside
of bus outward and remove.
3. Position new glass in glazing rubber.
4. Using installation tool, work glass into glazing rubber.
5. Seal glass to glazing rubber from outside of the bus with an adhe-
sive sealant such as, Silastic 732 RTV Adhesive/Sealant.
6. Apply soapy solution to filler strip channel on glazing rubber to
act as a lubricant for easier installation of filler strip.
7. Using filler strip tool, insert fillet strip into channel on glazing
rubber.
WARNING: When replacing broken or damaged glass, use extreme
care at all times to prevent personal injury. This includes the use of
proper replacement parts, tools and personal protective equipment, such
as gloves and safety goggles.
Step 4
Step 7
