_____________________________________________________________________
724-746-5500 | blackbox.com
Page 62
Select
Serial & Network: Trusted Networks.
To add a new trusted network, select
Add Rule
.
Select the
Accessible Port(s)
that the new rule is to be applied to.
Then, enter the
Network Address
of the subnet to be permitted access.
Then, specify the range of addresses that are to be permitted by entering a
Network Mask
for
that permitted IP range,
for example:
To permit all the users located with a particular Class C network (for example, 204.15.5.0)
connection to the nominated port then you would add the following Trusted Network New
Rule:
Network Address
204.15.5.0
Network Mask
255.255.255.0
If you want to permit only the one user who is located at a specific IP address (for example,
204.15.5.13 say) to connect:
Network Address
204.15.5.0
Network Mask
255.255.255.255
If, however, you want to allow all the users operating from within a specific range of IP
addresses (for example, any of the thirty addresses from 204.15.5.129 to 204.15.5.158) to
be permitted connection to the nominated port:
Host /Subnet Address
204.15.5.128
Subnet Mask
255.255.255.224
Click
Apply.
