_____________________________________________________________________
724-746-5500 | blackbox.com
Page 45
To add to the static route to the route table of the system:
Select the
Route Settings
tab on the
System: IP
General Settings
menu.
Enter a meaningful
Route Name
for the route .
In the
Destination Network/Host
field enter the IP address of the destination network/host that
the route provides access to.
Enter a value in the
Destination netmask
field that identifies the destination network or host. Any
number between 0 and 32. A subnet mask of 32 identifies a host route.
Enter
Route Gateway
with the IP address of a router that will route packets to the destination
network.
Enter a value in the
Metric
field that represents the metric of this connection. This generally only
has to be set if two or more routes conflict or have overlapping targets. Any number equal to or
greater than 0.
Click
Apply.
