BK Radio P150, Руководство по обслуживанию

Страница: 92 / 264

BK Radio Page 3-13
operation
3.5.9 Zone Scan (ZScn)
When Zone Scan is turned on, the radio scans all programmed scan channels in zones programmed as
Zone Scan zones.
C h 1
K N G - P 2 5
171. 5 8 5 0 0 M H z
liGt t/a menu lck
C h 1
K N G - P 2 5
171. 5 8 5 0 0 M H z
liGt t/a menu lck
rxdn Scan
Scan
toggle switch operation
On - Slide the programmed switch toward the front of the radio.
Off - Slide the switch up toward the channel select switch.
Button Operation
On - Press the programmed button.
ZScn
Off - Press the button again.
ZScn
menu operation
Z o n e S e l e c t
Z o n e S c a n
P R I S c a n
ESC ▲ ▼ ENT
txd
Z o n e S c a n
→
O f f
O n
ESC ▲ ▼ ENT
1. Press the assigned Menu button.
2. Use the up/down buttons to select ‘Zone Scan’.
3. Press the ‘ENT’ button.
4. Use the up/down buttons to select On or Off.
5. Press the ‘ENT’ button to set the selection.
6. Hold the ‘ESC’ button to return to normal operation.
3.5.10 Zone Scan liSt add/delete
A menu item can be programmed to add or remove Zones to the Zone Scan List.
To add a zone to the Scan List:
Z o n e S c a n
ZO N E 1
+ZO N E 2
ESC ▲ ▼ +/-
C h 1
K N G - P 2 5
171. 5 8 5 0 0 M H z
liGt t/a menu lck
rxd Scn
Ta l k a r o u n d
T x P o w e r
Z o n e S c n L i s t
ESC ▲ ▼ ENT
1. Press the Menu button.
2. Use the up/down buttons to select ‘Zone Scan List’.
3. Press the ‘ENT’ button.
4. Use the up/down buttons to select the zone to add or delete.
Or use the keypad to enter the number of the desired zone.
5. Press the +/- button to toggle the selection.
Zones in the scan list will be proceeded by a ‘+’ symbol.
6. Hold the ‘ESC’ button to return to normal operation.