BK Radio P150, Руководство по обслуживанию

Страница: 95 / 264

Page 3-16 Service Manual - KNG Portables
operation
receivinG a unit-to-unit call
C h a n n e l 1
Z o n e 2
P 2 5 I D
liGt t/a menu u2u
rxd

When receiving a unit-to-unit call the beeps and the phone icon is displayed
during the reception.
After the message the phone icon will continue flashing to indicate that a unit-to-
unit call has been received.
Clear the icon by entering the unit-to-unit call mode and pressing ‘ESC’ or by
cycling radio power.
3.7.2 unit-to unit callBack
If enabled, pressing PTT during the hold time results in a Unit-to-Unit call to the received unit ID.
3.7.3 call liSt proGramminG
If enabled with the PC radio editor, the P25 Call List can edited via the radio’s keypad programming
function. (See Keypad Programming)
3.8 pick liSt optionS
The KNG provides users the ability to select and assign Pick List functions to specific channels. Pick List
options include: Transmit Code Guards, Transmit NACs, Receive Code Guards, Receive NACs, Talk
Group IDs and Encryption Keys. Pick List Options can be assigned to a programmed button or a radio
menu item.
3.8.1 cxcSS code Guard (tcG/rcG)
Selecting a CTCSS/CDCSS tone from the ‘User Rx Tones’ or ‘User Tx Tones’ Pick List will assign the
tone to the receive or transmit function of the currently select channel.
Button operation
U s e r T x To n e s
→
D e f a u l t
1 - 1 0 0 . 0
ESC ▲ ▼ ENT
C h 1
K N G - P 2 5
171. 5 8 5 0 0 M H z
rky tcG menu lck
rxd Scn
Turn to the channel you wish to assign the Tone to. 1.
Press the programmed button. ( 2.
tcG or rcG)
Use the up/down buttons to select the desired tone (1-32) 3.
or select the tone using the numeric keypad.
‘Default’ uses the Code Guard programmed to the channel
via PC or Keypad programming
Press the ‘ENT’ button to set the selection. 4.
Press ‘ESC’ to return to normal operation. 5.