BK Radio P150, Руководство по обслуживанию

Страница: 90 / 264

BK Radio Page 3-11
operation
transmit on PR1, transmissions will occur on the first priority channel when operating in Priority Scan
Mode.
Priority Scan can be used in combination with Code Guard. If a message is received on a priority
channel, the radio receiver locks on to the priority channel and checks to see if the proper Channel
Guard value is present. If the signal contains the proper Channel Guard value, the radio receives the
message. Otherwise, the radio will re-check the channel every 4 seconds, until the activity on the
channel ceases.
If enabled the user can use the keypad to change the priority channels. The Priority Channel selection
can be programmed to a programmed button or as a menu item.
NOTE: To use Zone based Priority Channels set both Global Priority Channel 1 and 2 to ‘OFF’.
To select a new Priority Channel:
P r i C h a n s
G l o b P r 1 C h a n
G l o b P r 1 Z o n e
ESC ▲ ▼ ENT
C h 1
K N G - P 2 5
171. 5 8 5 0 0 M H z
liGt t/a menu pr1
rxd Scn
G l o b P r 1 C h a n
→
O f f
M a i n
ESC ▲ ▼ ENT
G l o b P r 1 Z o n e
→
Z o n e 1
Z o n e 2
ESC ▲ ▼ ENT
Z o n e 0 1 P r 1
→
C h a n n e l 1
C h a n n e l 2
ESC ▲ ▼ ENT
Button operation
1. Press the programmed button.
pri1
2. Use the up/down buttons to select the priority channel or zone you wish to
edit.
‘Glob PR1 Channel’
‘Glob PR2 Zone’
‘Zone Pr1’
‘Zone Pr2’
3. Select the desired setting with the up/down button or by the numeric keypad.
4. Press ‘ENT’ to set the selection.
5. Press ‘ESC’ to return to the Priority Settings menu.
6. Hold ‘ESC’ to return to normal radio operation.