BK Radio P150, Руководство по обслуживанию

Страница: 54 / 264

BK Radio Page 2-39
installation and programming
For transmit, each channel is assigned a default key. The key can be locked to the channel, or if programming
allows, a transmit key other than the default key can be selected from the radio’s Key Pick List (see Global
Encryption screen for options).
Click on the box or use the space bar to select “L” to lock the key to the channel or “-” to allow use of the
Encryption Key Pick List.
NOTE: If a key is selected from the pick list during radio operation, it will be used during transmit on every
channel that allows selectable keys.
otar
The following applies only to radios equipped with the Over-the-Air rekeying (OTAR) option.
This programming software must be used to Enable OTAR and to mark the channel(s) that will communicate
with the Key Management Facility (KMF). In addition, the radio must have key encryption keys (used only
to encrypt other keys) loaded with an APCO Project 25 compatible key fill device such as the Motorola
KVL 3000 Plus, using a BK Radio keyloader cable.
Use the dropbox to select “O” for channels that will receive OTAR messages, or “-” to disable OTAR on
the channel.
2.2.3.4 Zone SettinGS
Individual zone settings designate radio functions when operating in the selected group regardless of
what channel is selected.
To program a Zone’s settings click on the ‘Settings’ folder under the
desired Zone folder.
NOTE: If the ‘Seatings folder is not visible click the + to the left of
the Zone folder.
Zone label
The radio can be programmed with a label for each of channel zone.
Each label can include up to fourteen characters.
Characters can include A–Z, 0–9, – , . , *, $, /, +, %, \, |, _, <, >, h, or
a blank space. The Zone Label can be programmed to be displayed
on the Radio’s LCD. (See Global Settings/General tab)