Operating Manual
28
feed. if the grinding mode is set to “PLUNGE GRINDING” mode the
table couldn’t make cross rapid or intermittent feed.
4. Wheel head vertical up / down movement
a) AH
model
: the wheel head can only up/down by manual and handwheel.
b)
AHR model
:
push the SB6 “
”
, the wheel head make step down feed
NOTE: when the spindle rotating, the function is no use
.
Push the SB7
“
, the wheel head make step up feed.(on the up
limit position, there is an protect switch)
c)
AHD model
: rapid up/down feed, step-feed and auto down feed control.
1. Rapid feed:
turn the SA4 (Wheel head vertical movement mode selecting knob
(Jog-feed, rapid-feed, Auto feed) to “ rapid feed
” keep push on
the SB6 “
”
, the wheel head make rapid down moving
Push the SB7 “, the wheel head make rapid up moving.(on the up
limit position, there is an protect switch).
2. Jog-feed:
turn the SA4 to “Jog-feed
”,
one push
SB6 “
”
, the wheel head
make one step down feed, the feed value could be set by SA6
(Wheel head down feed value adjusting knob) from
0.0002/0.0004/0.0008/0.0016/0.002 in. push down SB7, the wheel head
Содержание WSG1640AHD
