Operating Manual
24
c. creep age
d. transformer is bad.
2. Table longitudinal movement
a
)
Start the oil pump: turn the SA5 to “ magnetized
“ position, the
electric magnetic chuck engaged, waiting for a moment then push Key
F6 on HMI, the oil pump start, Push F2, the oil pump stop.
when push the F6, the oil pump not start, may be cause by:
a. there is error of undercurrent rely in the circuit control chuck
(magnetizable or unmagnetizable) ; b. the oil pump motor circuit is
short
b
)
Table moving speed is control by an
Adjusting lever located on the top surface of
saddle. Turn the lever clockwise, speed
changing from low to high.
c
)
Table longitudinal movement reverse
the stroke is adjusted by moving these two
Reversing dog, while direction control arm touch the reversing block, the
table movement would reverse.
Содержание WSG1640AHD
