Birmingham WSG1640AHD, Руководство по эксплуатации

Страница: 10 / 85

Operating Manual
2
and glove.
(2) Don’t lean against the machine in working range
(3) Don’t adjust the grinding wheel cover, right or left travel limit control
block, nozzle with hand or tools when the machine is running.
(4) Don’t blow out scrap or dust with compressed air to protect operator’s
eyes.
1.2. safety regulation of the machine
(1) Be sure that the allowable maximum fringe speed of wheel is 35m/s or
higher.
(2) Pay attention to correlative warning instructions before inspecting and
maintaining.
(3) When inspecting electrical parts, must wear nonconducting protector
such as insulating gloves, rubber shoes and so on..
(4) All the electrical parts needing earth should be properly earthed
according to circuit diagram.
(5) Be sure that circuit is turned off with appropriate instrument before
inspecting circuit
(6) Only certified operator can open the electrical box and inspect circuit
when there is fault.
(7) If the hardness of work-piece is more than HRC65 and grinding is
difficult, Please connect with wheel manufactory and choice a proper
kind of wheel.
(8) The grinding wheel should be installed after balanced, the wheel
should be balanced by trained worker. Before fixing the wheel on the
spindle, cleaning contact surface between flange and front end of
spindle.
(9) Should confirm the position and performance of emergency switch