Operating Manual
19
No Lubricate
point
Lubricating
mode
Lubricant Times
1
V slide way of saddle
Auto lubricating
32
#
slide way oil Adjustable
2
Cross feed screw
Auto lubricating
32
#
slide way oil Adjustable
3
Lifting feed screw/nut
Auto lubricating
32
#
slide way oil Adjustable
4
Front slide way of
column
Auto lubricating
32
#
slide way oil Adjustable
5
V slide way of saddle
Auto lubricating
32
#
slide way oil Adjustable
6
Back slide way of
column
Auto lubricating
32
#
slide way oil Adjustable
7
Flat slide way of table
Auto lubricating
32
#
slide way oil Adjustable
8
V slide way of table
Auto lubricating
32
#
slide way oil Adjustable
C. Program of lubricating and oil feed adjusting.
Turn on the power, the lubrication pump is running, and the green DIS lamp
(running timing ) is shinning, this means the pump is running. The “running
timing” is over and the “ stop timing” is on work, and DIS lamp is dark and
the yellow INT lamp is shinning. The “stop timing” program is stopped, then
go to next cycle. If the oil is empty, the red EMG lamp will shine, this time
you should refill oil. The oil-feed adjustment by adjusting the running timing
knob DIS. TIME( the range from 2s to 90s) or the stop timing knob INT.
Содержание WSG1640AHD
