Birmingham WSG1640AHD, Руководство по эксплуатации

Страница: 45 / 85

Operating Manual
37
5.2. Operating caution
：
1) Before install of remove the wheel, shut off the power in advanced.
2) Don’t operate the grinding machine which have no wheel cover, it is
forbidden that opening the wheel cover while working.
3) Not move the work piece or put hand on the table before the wheel stop
4) Make sure that work piece is fixed on the table substantially.
5) Must not try to fix the work piece by hands.
6) The length and weight of the work piece must be lower than the rating.
7) Using the suitable wheel, dress the wheel often and keep the wheel
sharp.
8) Make hand and clothes far away from the table and wheel while
working.
9) And not try to connect any wire if you do not know well about the circuit
and electrical parts to prevent from damage.
10) Make the wheel free running about 5 minutes before working, don’t be in
the danger range.
11) The operator should dress the respirator and prevent glass while dry
grinding.
12) Not using the wheel which the speed is higher than rating.
13) Closing the wheel cover fixed before running the grinding head motor.
14) Be sure the feed is suitable, large feed will heat the work piece and